Manufacturing Steps
STEP1
First making a 3D modelling effcet pitcures for client to confirm
STEP2
Using digital sculpting making a baby sculpture(reduce in scale);passing above two steps, client can see which their want.
STEP3
Next step We're going to make a large size model what client ordered,with 1:1 scale, stainless steel plate to do its epidermis,the metal steel pipe is the internal support frame.(Throughout the production process, we will continue to advance and provide photos to the end)
STEP4
Shipping (Try our best to do the smallest area and strongest to pack products,in order to save shipping fee for clients.
Manner of packing:blanket + pearl wool + bubble film + steel shelf(for FCL= Full Container Load) /wooden box (for LCL =less than container load)
STEP 5
How to install it---(We will provide detailed installation instructions)
HOW TO WELDING A STEEL SCULPTURE ?
During the welding and assembly process of weathering steel mountain, in order to ensure the safety, stability and durability of the structure, special attention should be paid to the following key links and details:
Selection of welding process
According to the specific thickness, shape and overall structural requirements of weathering steel, it is crucial to reasonably select the appropriate welding method. For instance, for thinner weathering steel plates, gas shielded welding (such as MIG/MAG welding) can be given priority because it has a high thermal efficiency and low heat input, which can effectively reduce the impact on material properties. For thicker plates or complex structures, manual arc welding (SMAW) or other more powerful welding techniques may be required. Each welding method has its applicable scope and characteristics, so scientific decisions must be made in combination with the actual situation.
Matching of welding materials
In order to ensure that the mechanical properties and corrosion resistance between the weld seam and the base metal are consistent, welding materials that match the chemical composition and mechanical properties of weathering steel must be selected. This includes but is not limited to the selection of welding rods, welding wires and shielding gases. For instance, if weathering steel contains a certain proportion of alloying elements such as copper and nickel to enhance its corrosion resistance, then the welding materials should also incorporate similar alloying components to ensure that the weld area has the same corrosion resistance. In addition, it is necessary to pay attention to whether the strength of the deposited metal of the welding materials meets the design requirements to avoid structural failure caused by insufficient weld strength.
Preparations before welding
The preparatory work before welding is the basis for ensuring the quality of welding. First of all, the surface of the welded parts should be thoroughly cleaned to completely remove oil stains, rust, oxide layers and other impurities that may affect the welding effect. These pollutants not only reduce the quality of welded joints, but also may lead to the occurrence of defects such as pores and cracks. Common cleaning methods include mechanical grinding, chemical cleaning or sandblasting treatment, etc. At the same time, it is also necessary to check the dimensional accuracy and flatness of the welded parts to ensure that they meet the assembly requirements and create favorable conditions for subsequent welding.
Welding sequence planning
A reasonable welding sequence can significantly reduce welding deformation and improve the overall stability of the structure. It is usually recommended to start welding symmetrically on both sides from the center of the structure. This can balance the heat distribution and reduce local stress concentration. For complex three-dimensional structures, the operation can also be carried out in accordance with the principle of welding the parts that are subjected to greater force first and then the secondary parts. In addition, during actual construction, the welding path can be flexibly adjusted according to specific circumstances. For instance, deformation can be further controlled by using the segmented backwelding method or the skip welding method.
Control the welding temperature
Excessively high welding temperatures can have adverse effects on the microstructure and properties of weathering steel, such as causing grain coarsening, reduced hardness or increased brittleness. Therefore, during the welding process, the heat input must be strictly controlled to avoid excessive heating. This goal can be achieved by adjusting parameters such as welding current, voltage and speed. Meanwhile, preheating measures or post-weld slow cooling treatment can also be taken when necessary to relieve thermal stress and improve the toughness of the weld area.
Inspection of weld quality
After the welding is completed, a strict visual inspection of the weld seam must be carried out to ensure that there are no obvious defects such as cracks, pores and slag inclusions on its surface. Visual inspection can be carried out through visual inspection or with the aid of tools such as magnifying glasses. For some critical parts or high-demand occasions, further non-destructive testing, such as X-ray inspection, ultrasonic inspection or magnetic particle inspection, etc., is still needed to detect potential internal defects. Only weld seams that have passed comprehensive inspection can be put into use; otherwise, they need to be reworked and repaired in a timely manner.
Welding deformation correction
Although various measures have been taken to reduce welding deformation, a certain degree of deformation may still occur in actual operation. At this point, corrective measures should be taken promptly to make corrections. Common correction methods include mechanical correction and thermal correction. Mechanical correction is applicable to cases of slight deformation, by applying external force to restore the welded parts to their original state. Heating correction, on the other hand, is applicable to cases of significant deformation. It achieves the correction purpose by locally heating the metal to cause plastic deformation. No matter which method is adopted, it is necessary to pay attention to controlling the correction force and temperature to avoid secondary damage to the performance of the steel.
Safety protection measures
Welding operations are high-risk operations, so great importance must be attached to safety protection work. When performing welding, operators should wear protective equipment that meets the standards, such as protective glasses, face masks, gloves and fireproof suits, etc., to prevent spatter, ultraviolet radiation and high-temperature burns from causing harm to the human body. In addition, it is necessary to ensure good ventilation in the workplace to prevent the accumulation of harmful gases, and to comply with relevant safety regulations and operating procedures to maximize safety and reliability
FAQ
CONTACT US
Thank you so much for taking the time to read through all the information above. We would be delighted if you could reach out to us for any further details. Together, let's explore the possibilities of building a mutually beneficial partnership. Warmest regards.
Product Parameters
NAME and THEME :corten steel artwork
MATERIAL ANALYSIS:CORTEN STEEL
SURFACE TREATMENYT:RUST
MOQ:1pc order
PROCUCT PURPOSE: decoration sculptures can been placed anywhere--pool /park/public place/Residential estate
Hot Tags: corten steel artwork, China corten steel artwork manufacturers, suppliers, factory, Corten Steel Artwork, Corten Steel Garden Art Sculpture, Large scale Outdoor Corten Steel Fountain Sculpture, Leaf shaped Corten Steel Art Sculpture, Modern Corten Mountain Design Sculpture, Rusted Steel Garden Sculpture








